DocumentCode
1239662
Title
SAW synchronous multimode resonator with gold electrodes on quartz
Author
Soluch, Waldemar
Author_Institution
Inst. of Electron. Mater. Technol., Warsaw
Volume
55
Issue
6
fYear
2008
fDate
6/1/2008 12:00:00 AM
Firstpage
1391
Lastpage
1393
Abstract
A surface acoustic wave synchronous multi- mode resonator with gold electrodes on ST-cut quartz was designed, fabricated, and measured. At a frequency of about 194.3 MHz, an insertion loss of about 14 dB, and loaded and unloaded quality factors of 11,500 and 14,500, respectively, were obtained.
Keywords
electrodes; gold; surface acoustic wave resonators; Au; ST-cut quartz; SiO2; gold electrodes; insertion loss; quality factors; surface acoustic wave synchronous multimode resonator; Acoustic measurements; Acoustic waves; Electrodes; Frequency; Gold; Insertion loss; Q factor; Reflection; Resonance; Surface acoustic waves; Acoustics; Computer-Aided Design; Equipment Design; Equipment Failure Analysis; Gold; Microelectrodes; Quartz; Transducers; Vibration;
fLanguage
English
Journal_Title
Ultrasonics, Ferroelectrics, and Frequency Control, IEEE Transactions on
Publisher
ieee
ISSN
0885-3010
Type
jour
DOI
10.1109/TUFFC.2008.803
Filename
4536935
Link To Document