Abridgment of telephone transmission networks: Types and problems of design

A brief résumé of the nature of telephonic signals is given, showing how the qualities of wave composition which distinguish signals from other electrical waves set the requirements on networks and provide a basis for their design. The principal functions of wave filters, equalizers, telephone transformers, line balancing networks, and artificial lines are outlined. In order that these networks may be used in conjunction with other apparatus in the telephone system, they must provide efficient transmission, low distortion, good impedance balance, stoppage of longitudinal currents, stable characteristics with current variations, low external coupling, and low reflection coefficient. In addition to these requirements, the network must not cross-talk into associated circuits and must have desirable impedance characteristics in the attenuation range of frequencies as well as throughout the transmission range. An illustration of the use of transmission networks in a typical three-channel carrier telephone system is given describing the functions of the line filter sets, the directional filter sets, band filters, and equalizers. Some of the engineering limitations on the design and construction of networks are discussed.