DocumentCode :
1272186
Title :
THz dichroic plates for use at high angles of incidence
Author :
Siegel, Peter H. ; Dengler, Robert J. ; Chen, Jacqueline C.
Author_Institution :
California Inst. of Technol., Pasadena, CA, USA
Volume :
1
Issue :
1
fYear :
1991
Firstpage :
8
Lastpage :
9
Abstract :
The design of a high-frequency dichroic plate consisting of an electrically thick self-supporting metallic mesh that can be used in a linearly polarized quasi-optical system at high angles of incidence is described. The measured and computed performance of a 2.5-in-aperture mesh is given. This mesh has a 3-dB cutoff frequency of 875 GHz and less than 0.75 dB of transmission loss from 950-1350 GHz at incidence angles of 0, 30, and 45 degrees . The results of a multimode waveguide analysis corroborate the measured data.<>
Keywords :
submillimetre wave devices; waveguide components; 875 to 1350 GHz; THF; THz dichroic plates; electrically thick mesh; high-frequency; incidence angles; linearly polarized quasi-optical system; multimode waveguide analysis; self-supporting metallic mesh; transmission loss; Cutoff frequency; Drilling; Lattices; Magnetic separation; Passband; Polarization; Propulsion; Space technology; Wavelength measurement; Wire;
fLanguage :
English
Journal_Title :
Microwave and Guided Wave Letters, IEEE
Publisher :
ieee
ISSN :
1051-8207
Type :
jour
DOI :
10.1109/75.80675
Filename :
80675
Link To Document :
بازگشت