• DocumentCode
    1281103
  • Title

    Multimode polymeric waveguide devices fabricated by two-component injection moulding

  • Author

    Fischer, D. ; Voges, E.

  • Author_Institution
    Lehrstuhl fur Hochfrequenztech., Dortmund Univ., Germany
  • Volume
    33
  • Issue
    19
  • fYear
    1997
  • fDate
    9/11/1997 12:00:00 AM
  • Firstpage
    1626
  • Lastpage
    1627
  • Abstract
    Multimode polymeric waveguide devices with PMMA substrates, large core (0.25-2mm2) styrene/acrylonitril copolymer waveguides and PMMA superstrates have been fabricated by injection moulding. Waveguide losses of 0.15-0.3 dB/cm have been measured in the 600-1100 nm wavelength range. The stability of the devices has been tested by temperature cycling between -40°C and +75°C
  • Keywords
    optical fabrication; optical losses; optical planar waveguides; optical polymers; optical waveguide components; polymer blends; thermal stability; -40 to 75 C; 0.15 to 0.3 dB; 600 to 1100 nm; PMMA substrates; PMMA superstrates; integrated optics; large core waveguides; multimode polymeric waveguide devices; stability testing; styrene/acrylonitril copolymer waveguides; temperature cycling; two-component injection moulding; waveguide losses;
  • fLanguage
    English
  • Journal_Title
    Electronics Letters
  • Publisher
    iet
  • ISSN
    0013-5194
  • Type

    jour

  • DOI
    10.1049/el:19971076
  • Filename
    629598
    • Link To Document
    https://search.isc.ac/dl/search/defaultta.aspx?DTC=49&DC=1281103