A compact, high repetition-rate, nanosecond pulse generator based on magnetic pulse compression system

Magnetic pulse compression (MPC) system has been widely-used over a few decades as a technique for producing short duration, high peak power pulses reliably. A compact pulse generator with a 3-stage MPC system (assembled with amorphous cores and ferrite cores) is constructed to generate repetitive pulses of maximum 7.5 MW peak power with pulse width (FWHM) of 70 ns and rise time of 30 ns at the maximum pulse repetition rate of 2 kHz into a 307 resistive load. In this paper, the detailed system design and operational characteristics of the MPC modulator are presented. The MPC has 3-stage pulse compression circuit using two saturable pulse transformers and a magnetic switch. The saturable pulse transformer has two functions, a step-up transformer and a magnetic switch. The generator consists of 2 units with distinct functions. The resonant charge unit is a diode based auto L-C resonator recharger. The 3-stage MPC unit comprises a saturable pulse transformer which compress the pulse width to 1.5 μs and step up the amplitude to 7 kV, and a 2-stage magnetic pulse compressor using another saturable pulse transformer and a magnetic switch, which compress the pulse rise time to 30 ns and step up the amplitude to 62 kV at most (1 kΩ resistive load).