A Modified SEPIC Converter for High-Power-Factor Rectifier and Universal Input Voltage Applications

A high-power-factor rectifier suitable for universal line base on a modified version of the single-ended primary inductance converter (SEPIC) is presented in this paper. The voltage multiplier technique is applied to the classical SEPIC circuit, obtaining new operation characteristics as low-switch-voltage operation and high static gain at low line voltage. The new configuration also allows the reduction of the losses associated to the diode reverse recovery current, and soft commutation is obtained with a simple regenerative snubber circuit. The operation analysis, design procedure, and experimental results obtained from a 650-W universal line power-factor-correction prototype of the proposed converter are presented. The theoretical analysis and experimental results obtained with the proposed structure are compared with the classical boost topology.