High Resolution Stroboscopic Neutron Radiography at the FRM-II ANTARES Facility

The rapidly developing field of high resolution neutron radiography primarily concentrates on non-destructive studies of stationary objects with relatively long exposure times required to achieve adequate neutron statistics. The combination of a high intensity neutron beam with a high temporal and spatial resolution detector, enables the investigation of dynamic processes in a stroboscopic mode, where image frames are synchronized with the sample or acquired continuously at high acquisition frame rates. Although neutron statistics in the acquisition frames as short as <; 10 μs is considered quite low (typically <; 1000 n/cm² at the sample), repetitive processes can still be studied with high resolution by integrating a large number of frames synchronized to the process. In this paper we demonstrate the stroboscopic imaging capabilities of the highly collimated thermal neutron beamline ANTARES together with a high resolution detector with neutron-sensitive microchannel plates and the Medipix2 readout. The dynamics of water uptake due to capillary forces as well as the two-phase flow of an air-water mixture is investigated, and stroboscopic imaging of an operating beam chopper and a spinning fan is performed, with sub-100-μm spatial resolution and with acquisition frames varying between 10 μs and 200 ms. The results of these experiments demonstrate the future potential for performing high resolution neutron radiography of fast and/or repetitive processes, such as water flow and uptake, operation of fuel injection nozzles, as well as many others.