• DocumentCode
    1304880
  • Title

    Magnetoelectric bending-mode structure based on Metglas/Pb(Zr,Ti)O3 fiber laminates

  • Author

    Gao, Junqi ; Shen, Ying ; Wang, Yaojin ; Finkel, Peter ; Li, Jiefang ; Viehland, Dwight

  • Author_Institution
    Mater. Sci. & Eng. Dept., Virginia Polytech. Inst. & State Univ., Blacksburg, VA, USA
  • Volume
    58
  • Issue
    8
  • fYear
    2011
  • fDate
    8/1/2011 12:00:00 AM
  • Firstpage
    1545
  • Lastpage
    1549
  • Abstract
    A magnetoelectric (ME) bending-mode structure based on Metglas/Pb(Zr,Ti)O3 fiber laminates has been studied. This bending mode had a fundamental resonance (FBR) of about 210 Hz, which was much lower than that of the longitudinal mode. Near the FBR, the ME voltage coefficient was about 400 V/cm·Oe. Magnetic sensors based on this bending mode had an equivalent magnetic noise floor of ≤0.3 pT/√Hz at f = 210 Hz.
  • Keywords
    bending; laminates; magnetoelectric effects; ME voltage coefficient; equivalent magnetic noise floor; fiber laminates; frequency 210 Hz; magnetic sensors; magnetoelectric bending-mode structure; Amorphous magnetic materials; Floors; Laminates; Magnetic noise; Magnetic resonance; Magnetoelectric effects; Magnetostriction;
  • fLanguage
    English
  • Journal_Title
    Ultrasonics, Ferroelectrics, and Frequency Control, IEEE Transactions on
  • Publisher
    ieee
  • ISSN
    0885-3010
  • Type

    jour

  • DOI
    10.1109/TUFFC.2011.1981
  • Filename
    5995211
    • Link To Document
    https://search.isc.ac/dl/search/defaultta.aspx?DTC=49&DC=1304880