Wide-bandwidth Ku-band monolithic analog frequency divider

Author

Desgrez, S. ; Gayral, M. ; Llopis, O. ; Cayrou, J.-C. ; Cazaux, J.-L. ; Sautereau, J.-F.

Author_Institution

Lab. d´Autom. et d´Anal. des Syst., CNRS, Toulouse, France

Volume

8

Issue

2

fYear

1998

Firstpage

84

Lastpage

86

Abstract

A new analog frequency divider configuration using a resistive field-effect transistor (FET) mixer with a series feedback is proposed. With this configuration, a large synchronization bandwidth of almost 30% has been achieved using an original CAD technique. This bandwidth has been effectively measured on a Ku-band monolithic microwave integrated circuit (MMIC) circuit together with an ultra-low power consumption. Moreover, the processed circuit using a standard 0.2-μm PHEMT technology (Philips-PML) is very compact (1.5 mm²).

Keywords

HEMT integrated circuits; MMIC frequency convertors; circuit feedback; field effect MMIC; field effect analogue integrated circuits; frequency dividers; integrated circuit design; synchronisation; 0.2 micron; CAD technique; Ku-band; PHEMT technology; SHF; broadband type; field-effect transistor mixer; large synchronization bandwidth; monolithic analog frequency divider; monolithic microwave integrated circuit; pseudomorphic HEMT; resistive FET mixer; series feedback; ultra-low power consumption; wide-bandwidth; wideband type; Bandwidth; Feedback; Frequency conversion; Frequency synchronization; Integrated circuit measurements; Microwave FET integrated circuits; Microwave FETs; Microwave integrated circuits; Microwave measurements; Power measurement;

fLanguage

English

Journal_Title

Microwave and Guided Wave Letters, IEEE

Publisher

ieee

ISSN

1051-8207

Type

jour

DOI

10.1109/75.658649

Filename

658649