Electric field-induced strain behavior in lithium- and copper-added potassium sodium niobate piezoceramics and 1-3 piezocomposites

Potassium sodium niobate (KNN)-based leadfree materials were prepared and their field-induced strain behaviors were investigated. Ceramic lead-free piezoelectric materials were prepared in bulk and fiber forms with 1 mol% CuO-added potassium sodium niobate K_0.5Na_0.5NbO₃ and x = 7 mol% lithium-modified (K_0.5-x/2 Na_0.5-x/2Li_x)NbO₃ compositions. Fibers were drawn using a novel alginate gelation technique. Piezocomposites were prepared from these fibers with 1-3 connectivity and an epoxy matrix. A fully recoverable electrostrain of up to approximately 0.11% was observed in the CuO-added sample, whereas the Li-modified sample yielded up to 0.10% at 50 kV/cm electric field. A strain value of up to approximately 0.03% at 50 kV/cm electric field was obtained for piezocomposites prepared from lithium-modified fibers. The high-field converse piezoelectric coefficient was calculated from the strain-electric field (x-E) graph for all samples. Strain characteristics of the bulk and piezocomposite samples were analyzed based on the variation of strain with respect to square of the polarization (x-P²) to determine the electrostrictive contribution to the strain.