A quadratic buck converter with lossless commutation

High switching frequency associated with soft commutation techniques is a new trend in switching converters. Following this trend, the authors present a buck pulsewidth modulation converter, where the DC voltage conversion ratio has a quadratic dependence on duty cycle, providing a large step-down. By introducing two resonant networks, soft switching is attained, providing highly efficient operating conditions for a wide load range at high switching frequency. Contrary to most of the converters that apply soft-switching techniques, the switches presented are not subjected to high switch voltage or current stresses and, consequently, present low conduction losses. The authors present, for this converter, the principle of operation, theoretical analysis, relevant equations and simulation and experimental results