Title :
A comparison of hot-carrier degradation in tungsten polycide gate and poly gate p-MOSFETs
Author :
Ang, D.S. ; Ling, C.H.
Author_Institution :
Dept. of Electr. Eng., Nat. Univ. of Singapore, Singapore
fDate :
4/1/1998 12:00:00 AM
Abstract :
A study is made of hot-carrier immunity of tungsten polycide and of non-polycide, n+ poly gate, buried-channel p-MOSFETs, under conditions of maximum gate current injection. Increased hot-carrier degradation is observed for WSix p-MOSFETs under low drain voltage stress, where trap filling by injected electrons is the dominant degradation process. Stress-induced damage evaluated by gate-to-drain capacitance Cgds measurement shows increased susceptibility to electron trapping in the WSix device. F-induced oxide bulk defects introduced during polycidation may be responsible for the increased trapping observed. In addition, a significant decrease in electron detrapping rate is observed, which suggests a deeper energy distribution of F-related traps. The greater susceptibility to electron trapping, coupled with a decrease in electron detrapping rate, result in the reduction in DC hot-carrier lifetime over four orders of magnitude (based on ΔVt=50 mV criterion) under normal operating voltages. As hot-carrier effects in p-MOSFETs continue to be a concern for effective channel lengths less than 0.5 μm, the reduced hot-carrier lifetime of WSix p-MOSFETs suggests that WF6-based silicidation may not be appropriate for deep submicrometer CMOS devices
Keywords :
CMOS integrated circuits; MOSFET; capacitance; carrier lifetime; electron traps; hot carriers; integrated circuit reliability; semiconductor device reliability; silicon; tungsten compounds; 0.5 micron; CMOS IC reliability; DC hot-carrier lifetime reduction; F-induced oxide bulk defects; Si; W polycide gate; WF6-based silicidation; WSi; WSix p-MOSFETs; buried-channel pMOSFETs; deep submicron CMOS devices; electron detrapping rate; electron trapping; gate-to-drain capacitance measurement; hot-carrier degradation; hot-carrier immunity; low drain voltage stress; maximum gate current injection; n+ poly gate; p-channel MOSFET; polycidation; stress-induced damage; trap filling; Degradation; Electron traps; Filling; Hot carrier effects; Hot carrier injection; Hot carriers; Low voltage; MOSFET circuits; Stress; Tungsten;
Journal_Title :
Electron Devices, IEEE Transactions on