DocumentCode :
1350025
Title :
Laser zone texturing on glass and glass-ceramic substrates
Author :
Kuo, David ; Vierk, Stan D. ; Rauch, Gary ; Polensky, Don
Author_Institution :
Seagate Recording Media, Fremont, CA, USA
Volume :
33
Issue :
1
fYear :
1997
fDate :
1/1/1997 12:00:00 AM
Firstpage :
944
Lastpage :
949
Abstract :
A RF driven CO2 laser is used to create laser bumps on glass and glass-ceramic substrates. The resulting bump height is found to be a function of laser parameters such as pulse width, spot size, and pulse energy. Composition, structure and chemical strengthening of the substrates also affect the laser bump topography. Laser bumps on glass-ceramic, non-strengthened glass, or strengthened glass substrates, all exhibit net volume gain. Possible mechanisms for the volume increase include density change due to glass quenched to a subcooled state and/or due to phase transition from the crystalline phase to the glass phase. Stress release may play a role in the case of chemically strengthened glass substrates. The tribological performance of laser texture on glass and glass-ceramic substrates again shows low stiction and low friction build-up
Keywords :
ceramics; glass; laser materials processing; substrates; surface texture; surface topography; RF driven CO2 laser; bump topography; chemical strengthening; composition; density; friction; glass-ceramic substrate; laser zone texturing; magnetic disc media; nonstrengthened glass substrate; phase transition; quenching; stiction; strengthened glass substrate; stress; structure; subcooling; tribology; volume; Chemical lasers; Crystallization; Friction; Glass; Laser transitions; Optical pulses; Radio frequency; Space vector pulse width modulation; Stress; Surfaces;
fLanguage :
English
Journal_Title :
Magnetics, IEEE Transactions on
Publisher :
ieee
ISSN :
0018-9464
Type :
jour
DOI :
10.1109/20.560136
Filename :
560136
Link To Document :
بازگشت