DocumentCode
1367160
Title
A direct field-oriented controller for induction motor drives using tapped stator windings
Author
Zinger, Donald S. ; Profumo, Francesco ; Lipo, Thomas A. ; Novotny, Donald W.
Author_Institution
Dept. of Electr. & Comput. Eng., Wisconsin Univ., Madison, WI, USA
Volume
5
Issue
4
fYear
1990
fDate
10/1/1990 12:00:00 AM
Firstpage
446
Lastpage
453
Abstract
The implementation of a direct method of field orientation that requires little knowledge of machine parameters and uses only readily measurable quantities is discussed. The system uses tapped stator windings to measure the air-gap flux. The signals from the tapped windings are also used in a flux-regulation loop. A speed controller is implemented using the ripples created in the tapped windings by the motion of the rotor slots through the flux for speed information
Keywords
angular velocity control; electric drives; induction motors; machine control; rotors; stators; air-gap flux; direct field-oriented controller; flux-regulation loop; induction motor drives; machine control; ripples; rotor slots; speed controller; tapped stator windings; Coils; Hardware; Induction motor drives; Magnetic field measurement; Motion control; Motor drives; Shafts; Stator windings; Torque control; Voltage;
fLanguage
English
Journal_Title
Power Electronics, IEEE Transactions on
Publisher
ieee
ISSN
0885-8993
Type
jour
DOI
10.1109/63.60688
Filename
60688
Link To Document