The influence of electrodes and conditioning on space charge accumulation in XLPE

The accumulation of space charge in planar crosslinked polyethylene (XLPE) samples under dc electric fields at room temperature was investigated using the pulsed electroacoustic (PEA) method. Three different organic semiconductor (semicon) materials containing carbon black at concentrations ~30 %wt, and vacuum-evaporated gold, were used as electrodes. Three different conditioning procedures were investigated. Unconditioned samples developed heterocharge with density increasing from zero at the electrodes, to a maximum at roughly one-third of the thickness, and then falling to zero around the center. They also developed homocharge close to the electrodes. The choice of electrode material had little effect on the heterocharge profile in unconditioned samples. Conditioning by holding at 80°C for four days, at rotary pump pressure or at atmospheric pressure, suppressed the accumulation of heterocharge. Homocharge accumulation close to the electrodes in samples with semicon electrodes was affected little by this conditioning, but was reduced considerably in samples with gold electrodes. Conditioning by holding at room temperature for seven days at rotary pump pressure had little effect. The heterocharge originates in inhomogeneous polarization due to a spatially inhomogeneous distribution of permanent dipole molecules, probably acetophenone. The dipole concentration decreases in going from the electrodes towards the center of the samples, as a result of diffusion of the molecules in the opposite direction. The homocharge originates in electronic charge injection/extraction across the electrode/XLPE interfaces