DocumentCode :
1385238
Title :
Comparison of mechanical and tribological properties of permalloy and high moment FeTaN thin films for tape recording heads
Author :
Deng, Hong ; Minor, MKevin ; Barnard, John A.
Author_Institution :
Dept. of Metall. & Mater. Eng., Alabama Univ., Tuscaloosa, AL, USA
Volume :
32
Issue :
5
fYear :
1996
fDate :
9/1/1996 12:00:00 AM
Firstpage :
3702
Lastpage :
3704
Abstract :
This paper reports experimental results of a comparative study for mechanical and tribological properties of permalloy (NiFe) and magnetically soft high moment FeTaN sputtered thin films. It was observed that the hardness, elastic modulus and wear resistance of FeTaN films are all superior to those of NiFe permalloy films. AFM observations on unworn films and worn surfaces of a wear scar revealed that pit formation may contribute to wear damage mechanisms for low load abrasive wear
Keywords :
Permalloy; atomic force microscopy; elastic moduli; hardness; iron compounds; magnetic heads; magnetic recording; magnetic thin films; soft magnetic materials; sputtered coatings; tantalum compounds; wear resistance; AFM; FeTaN; NiFe; abrasive wear damage; elastic modulus; hardness; magnetically soft high moment FeTaN sputtered thin film; mechanical properties; permalloy thin film; pit formation; tape recording head; tribological properties; wear resistance; Magnetic films; Magnetic heads; Magnetic materials; Magnetic properties; Magnetic recording; Magnetic separation; Mechanical factors; Soft magnetic materials; Sputtering; Transistors;
fLanguage :
English
Journal_Title :
Magnetics, IEEE Transactions on
Publisher :
ieee
ISSN :
0018-9464
Type :
jour
DOI :
10.1109/20.538809
Filename :
538809
Link To Document :
بازگشت