Title :
On the existence and characteristics of solution paths at algorithmic singularities [kinematically redundant arms]
Author :
O´Neil, Kevin A. ; Chen, Yu-Che ; Seng, Jiaqing
Author_Institution :
Tulsa Univ., OK, USA
fDate :
4/1/1998 12:00:00 AM
Abstract :
The extended Jacobian method is a popular approach for controlling a kinematically redundant arm which allows one to resolve redundancy by locally optimizing an objective function and to gain repeatability for a cyclic end effector trajectory. It is a special case of a family of methods called constraint function methods. It has been found that the occurrence of algorithmic singularities can cause severe difficulties and the advantages of the methods such as repeatability might no longer exist. The purpose of this paper is to study the characteristics of algorithmic singularities, especially those of corank 1. A result of the authors on kinematic singularities is used to obtain a sufficient condition for the existence of solution paths at algorithmic singularities of the constrained function method. The phenomenon of branch repeatability is shown to occur at an algorithmic singularity. We also show that the extended Jacobian method cannot successfully optimize the objective function beyond the singularity without loss of continuity of the joint derivative. Examples are given to demonstrate the use of our theoretical results
Keywords :
manipulator kinematics; redundancy; algorithmic singularities; branch repeatability; constraint function methods; cyclic end effector trajectory; extended Jacobian method; joint derivative; kinematic singularities; kinematically redundant arm; repeatability; solution paths; sufficient condition; Arm; Collision avoidance; Constraint optimization; End effectors; Jacobian matrices; Kinematics; Manipulators; Optimization methods; Orbital robotics; Sufficient conditions;
Journal_Title :
Robotics and Automation, IEEE Transactions on