Title :
Zinc loss of Mn-Zn ferrite sintered under alumina plate
Author :
Chen, S.H. ; Chang, S.C. ; Lin, I.N.
Author_Institution :
Dept. of Mater. Sci. & Eng., Nat. Tsing Hua Univ., Hsinchu, Taiwan
fDate :
9/1/1996 12:00:00 AM
Abstract :
Cover plate materials and the core-to-plate spacing were observed to significantly lower the initial permeability (μi) of the sintered Mn-Zn ferrite samples. The degradation of the μi-value correlates very well with the Zn loss from the samples. The serious Zn loss was enhanced when using Al2O3 materials as cover plate. The Al2O3 plate act as Zn-sink and the transportation in gas phase is the controlling process for Zn loss
Keywords :
alumina; ceramics; ferrites; magnetic permeability; manganese compounds; materials preparation; sintering; stoichiometry; zinc compounds; Mn-Zn ferrite; Zn loss; Zn-sink; alumina plate; core-to-plate spacing; cover plate materials; initial permeability; sintering; Composite materials; Cyclic redundancy check; Degradation; Ferrites; Kinetic theory; Magnetic materials; Materials science and technology; Permeability; Process control; Zinc;
Journal_Title :
Magnetics, IEEE Transactions on
