DocumentCode :
1404781
Title :
Studies of 
Strands Based on the Restacked-Rod Process for High Field Accelerator Magnets
Author :
Barzi, E. ; Bossert, M. ; Gallo, G. ; Lombardo, V. ; Turrioni, D. ; Yamada, Ryota ; Zlobin, A.V.
Author_Institution :
Fermi Nat. Accel. Lab. (Fermilab), Batavia, IL, USA
Volume :
22
Issue :
3
fYear :
2012
fDate :
6/1/2012 12:00:00 AM
Firstpage :
6001405
Lastpage :
6001405
Abstract :
A major thrust in Fermilab´s accelerator magnet R&D program is the development of wires which meet target requirements for high field magnets, such as high critical current density, low effective filament size, and the capability to withstand the cabling process. The performance of a number of strands with 150/169 restack design produced by Oxford Superconducting Technology using the Restacked-Rod Process was studied for round and deformed wires. To optimize the maximum plastic strain, finite element modeling was also used as an aid in the design. Results of mechanical, transport and metallographic analyses are presented for round and deformed wires.
Keywords :
accelerator magnets; finite element analysis; niobium compounds; plastic deformation; research and development; superconducting cables; superconducting coils; superconducting magnets; Fermilab accelerator magnet R&D program; Nb3Sn; Oxford superconducting technology; cabling process; deformed wires; finite element modeling; high critical current density; high field accelerator magnets; low effective filament size; mechanical analysis; metallographic analysis; plastic strain; restack design; restacked-rod process; round wires; strand study; thrust; transport analysis; Copper; Magnetization; Niobium-tin; Plastics; Superconducting cables; Superconducting magnets; Wires; Deformation; flux jumps ${rm Nb}_{3}{rm Sn}$
fLanguage :
English
Journal_Title :
Applied Superconductivity, IEEE Transactions on
Publisher :
ieee
ISSN :
1051-8223
Type :
jour
DOI :
10.1109/TASC.2011.2181298
Filename :
6111250
Link To Document :
