• DocumentCode
    1412335
  • Title

    Numerical Analysis and Electrical Insulation Design of a Single-Phase 154 kV Class Non-Inductively Wound Solenoid Type Superconducting Fault Current Limiter

  • Author

    Jin Bae Na ; Hyoungku Kang ; Tae Kuk Ko

  • Author_Institution
    Sch. of Electr. & Electron. Eng., Yonsei Univ., Seoul, South Korea
  • Volume
    22
  • Issue
    3
  • fYear
    2012
  • fDate
    6/1/2012 12:00:00 AM
  • Firstpage
    5602104
  • Lastpage
    5602104
  • Abstract
    The electrical insulation design of high voltage superconducting fault current limiters (SFCLs) should be confirmed for the stabilization of the power grid. This paper describes numerical analysis for high voltage SFCLs based upon the AC and lightning impulse dielectric tests. To calculate the field utilization factor, the electric field distributions for numerical analysis were calculated by finite element method (FEM) simulation tool. The correlation of experiments results and the field utilization factor was investigated. From the results, the electric field criterion of liquid nitrogen at 200 kPa was calculated. Furthermore, safety factor was also considered to design single-phase 154 kV class SFCL. This insulation design in liquid nitrogen focused only two parts of SFCL. Part 1 is gap distance between a cryostat and superconducting coils. Part 2 is gap distance between series-connections of non-inductively wound solenoid type coils.
  • Keywords
    cryostats; finite element analysis; insulation; power grids; superconducting coils; superconducting fault current limiters; FEM; cryostat; electric field distributions; electrical insulation design; field utilization factor; finite element method simulation tool; high voltage superconducting fault current limiters; lightning impulse dielectric tests; liquid nitrogen; noninductively wound solenoid type coils series connection; numerical analysis; power grid stabilization; pressure 200 kPa; single-phase class SFCL; single-phase class noninductively wound solenoid; superconducting coils; voltage 154 kV; Coils; Electric fields; Electrodes; Finite element methods; Insulation; Lightning; Solenoids; AC dielectric tests; conceptual insulation design of 154 KV SFCL; non-inductively wound solenoid type; sub-cooled liquid nitrogen; superconducting fault current limiters;
  • fLanguage
    English
  • Journal_Title
    Applied Superconductivity, IEEE Transactions on
  • Publisher
    ieee
  • ISSN
    1051-8223
  • Type

    jour

  • DOI
    10.1109/TASC.2011.2182333
  • Filename
    6119204