Robust asymmetric 6T-SRAM cell for low-power operation in nano-CMOS technologies

An asymmetric 6T-SRAM cell design is presented for reliable low-power circuit operation under large variability. A low overhead write assist circuit is added to increase the write-noise-margin (WNM) and improve the write speed/power. Sizing is used to strengthen the pull-down transistor of the feedback inverter of the single ended read circuit to enhance the static-noise-margin (SNM). Monte Carlo simulations indicate a 90% improvement in SNM and a boost in the WNM of 108% compared to the conventional 6T-SRAM design. Comparative analysis of a 65nm 64 ?? 32 bit SRAM designed using both SRAM cells (Symmetric-6T and Asymmetric-6T) shows the write delay and power decrease by 46% and 35%, respectively, while total power decreases by 52% using the proposed design.