DocumentCode
1437460
Title
Thermal Management System for Particle Sensors Design, Performance and Verification
Author
Larsson, Andreas ; Storstrom, Olav ; Seip, Torleif Tollefsen ; Hjelstuen, Magnus ; Bjorklund, Robert ; Spetz, Anita Lloyd ; Johansson, Mats L. ; Grant, Ann ; Jozsa, Peter ; Fägerman, Per-Erik ; Paaso, Jaska ; Hammarlun, Lars
Author_Institution
Instrum. Dept., SINTEF ICT, Oslo, Norway
Volume
12
Issue
6
fYear
2012
fDate
6/1/2012 12:00:00 AM
Firstpage
2299
Lastpage
2305
Abstract
This paper presents the thermal performance of a proposed thermal management device (patented in 2009) intended for a thermophoresis-based soot sensor. The performance was studied for temperatures ranging from 50 to 400°C and for exhaust speeds up to 10 m/s. It also presents the design and basic concepts. The performance study and design development were performed with finite element analysis (FEA). The FEA results were then verified with experiments in a heated wind tunnel. The relative performance of the device was found to increase for higher temperatures and lower wind speeds. The main conclusion drawn from this paper was that it is feasible to cool a sensor surface enough for a thermophoresis-based soot sensor in a diesel exhaust system.
Keywords
finite element analysis; sensors; soot; thermal management (packaging); FEA; diesel exhaust system; finite element analysis; heated wind tunnel; particle sensors design; temperature 50 degC to 400 degC; thermal management system; thermophoresis-based soot sensor; Finite element methods; Heating; Substrates; Temperature; Temperature sensors; Exhaust monitoring; finite element analysis (FEA); soot sensor; thermal management; thermophoresis;
fLanguage
English
Journal_Title
Sensors Journal, IEEE
Publisher
ieee
ISSN
1530-437X
Type
jour
DOI
10.1109/JSEN.2012.2185044
Filename
6144687
Link To Document