DocumentCode :
1437479
Title :
Superconducting pulse coil set for stability test of superconducting cables
Author :
Jeong, S. ; Vysotsky, V.S. ; Takayasu, M. ; Minervini, J.V.
Volume :
7
Issue :
2
fYear :
1997
fDate :
6/1/1997 12:00:00 AM
Firstpage :
211
Lastpage :
214
Abstract :
A superconducting pulse coil set was constructed for transient stability experiment of CICC (cable-in-conduit conductor). The pulse coil set was composed of an inner and an outer coil connected in series. With 5 T background field, the pulse coil produced an additional 2 T on the CICC. In order to simulate the TPX (Tokamak Physics Experiment) plasma initiation scenario, 2 T field drop from 7 T was tried with an approximate ramp rate of -25 T/s. This paper describes the design for the coil and presents the experimental results of its successful AC operation.
Keywords :
Tokamak devices; cable testing; plasma production; stability; superconducting cables; superconducting coils; transient analysis; 5 T; AC operation; CICC; TPX; Tokamak Physics Experiment; cable-in-conduit conductor; inner coil; outer coil; plasma initiation scenario; pulse coil; ramp rate; stability test; superconducting cables; superconducting pulse coil set; transient stability experiment; Conductors; Copper; Plasma simulation; Plasma stability; Superconducting cables; Superconducting coils; Superconducting magnetic energy storage; Superconducting magnets; Testing; Tokamaks;
fLanguage :
English
Journal_Title :
Applied Superconductivity, IEEE Transactions on
Publisher :
ieee
ISSN :
1051-8223
Type :
jour
DOI :
10.1109/77.614469
Filename :
614469
Link To Document :
بازگشت