DocumentCode
1460712
Title
A novel full-bridge DC-DC converter for battery charging using secondary-side control combines soft switching over the full load range and low magnetics requirement
Author
Ayyanar, Rajapandian ; Mohan, Ned
Author_Institution
Dept. of Electr. Eng., Arizona State Univ., Tempe, AZ, USA
Volume
37
Issue
2
fYear
2001
Firstpage
559
Lastpage
565
Abstract
A novel full-bridge DC-DC configuration with a tapped transformer and secondary side control is proposed. It achieves zero-voltage switching for the primary side switches and zero-current switching for the secondary side switches, under all operating conditions. The conduction losses are significantly lower than those in the conventional soft-switching DC-DC converters. Due to superior filter waveforms, the filter requirements, both at the input and at the output, are significantly reduced. The features of the proposed converter are compared with those for the conventional phase-modulated full-bridge DC-DC converters. The proposed configuration is ideally suited for the AC-DC stage of high-power battery-charging applications with a power-factor-corrected preregulator. Analytical and experimental results on a 500 W/100 kHz prototype are presented
Keywords
DC-DC power convertors; battery chargers; bridge circuits; electric current control; losses; power factor correction; switching circuits; voltage control; 100 kHz; 500 W; AC-DC stage; battery charging; conduction losses; filter waveforms; full load range; full-bridge DC-DC converter; low magnetics requirement; power-factor-corrected preregulator; primary side switches; secondary-side control; soft switching; tapped transformer; zero-current switching; zero-voltage switching; Batteries; Capacitance; DC-DC power converters; Filters; Inductance; Magnetic switching; Switches; Switching converters; Zero current switching; Zero voltage switching;
fLanguage
English
Journal_Title
Industry Applications, IEEE Transactions on
Publisher
ieee
ISSN
0093-9994
Type
jour
DOI
10.1109/28.913722
Filename
913722
Link To Document