DocumentCode
1464049
Title
Pipe-line design for pipe-type feeders
Author
Rifenburg, R. C.
Author_Institution
Consolidated Edison Company of New York, Inc., New York N. Y.
Volume
73
Issue
3
fYear
1954
fDate
3/1/1954 12:00:00 AM
Firstpage
213
Lastpage
213
Abstract
AN ECONOMIC DESIGN of pipe-type feeder has as small a pipe and as long a section as good engineering permits. Minimum pipe size must be large enough to insure that the top conductor, when in triangular formation, will not press against the pipe. If a clearance of 0.25 inch is calculated, using a conductor size with maximum tolerance, it is assumed that clearance is assured.
Keywords
Cable insulation; Conductors; Equations; Foot; Friction; Mathematical model; Presses;
fLanguage
English
Journal_Title
Electrical Engineering
Publisher
ieee
ISSN
0095-9197
Type
jour
DOI
10.1109/EE.1954.6439290
Filename
6439290
Link To Document