DocumentCode
1466630
Title
Discussion of "Flammable vapor ignition initiated by hot rotor surfaces within an induction motor: reality or not?"
Author
Lewis, William M.
Author_Institution
Eli Lilly & Co., Indianapolis, IN, USA
Volume
35
Issue
1
fYear
1999
Firstpage
112
Abstract
The author argues that the original paper´s authors (Hamer et al., see ibid., vol. 34, no. 1, p. 100-11, 1999) have made a positive contribution to the knowledge of operating electrical equipment in hazardous atmospheres by demonstrating that the published autoignition temperatures (AITs) for the tested gases are very conservative. He believes that further testing possibly should be performed to better define these AITs; however, the results of these tests indicate to him that there is no reason to consider changing any practices concerning the use of three-phase squirrel-cage motors in Class I, Division 2 locations.
Keywords
explosions; fires; ignition; rotors; safety; squirrel cage motors; autoignition temperatures; flammable vapor ignition initiation; hazardous atmospheres; hot rotor surfaces; induction motor; paper discussion; safety practices; three-phase squirrel-cage motors; Atmosphere; Flammability; Gases; Ignition; Induction motors; Performance evaluation; Probability; Rotors; Temperature; Testing;
fLanguage
English
Journal_Title
Industry Applications, IEEE Transactions on
Publisher
ieee
ISSN
0093-9994
Type
jour
DOI
10.1109/28.740852
Filename
740852
Link To Document