Ultrasonic characterization of the quality of an epoxy resin polymerization

This work concerns monitoring the polymerization of an epoxy resin and its hardener. An ultrasonic pulse echo technique was used to monitor the attenuation, the phase velocity, and the acoustic impedance of the resin as a function of time. The first two parameters give information about the average state of the hardening of the resin itself. The third parameter, acoustic impedance, indicates the state of the hardening of the resin at the interface with the vessel. These parameters are determined from spectral properties of echoes extracted from the experimental echo waveforms. Experiments were made for different proportions of hardener and allowed a determination of the best mixture (10% of hardener) that corresponds to the manufacturer´s recommended value. Analysis of the results shows a progressive hardening from the center of the resin toward the walls of the vessel.