DocumentCode :
1470947
Title :
Design and fabrication of low-loss polymer waveguide components for on-chip optical interconnection
Author :
Robitaille, Lucie ; Callender, Claire L. ; Noad, Julian P.
Author_Institution :
Commun. Res. Centre, Ottawa, Ont., Canada
Volume :
8
Issue :
12
fYear :
1996
Firstpage :
1647
Lastpage :
1649
Abstract :
This paper reports the fabrication and characterization of straight and curved polyimide waveguides for on-chip optical signal distribution in GaAs-based optoelectronic integrated circuits. Polyimide ridge waveguides with propagation losses (at 830 nm) as low as 0.6 dB/cm have been fabricated. S-bends and splitters with low curvature losses and good splitting ratios have also been successfully fabricated and tested. The effects of the material properties and radius of curvature on the optical losses are presented, and the advantages of this polymer technology are discussed.
Keywords :
III-V semiconductors; gallium arsenide; integrated optoelectronics; optical communication equipment; optical fabrication; optical losses; optical polymers; optical waveguides; ridge waveguides; 830 nm; GaAs; GaAs-based optoelectronic integrated circuits; S-bends; curved polyimide waveguides; good splitting ratios; low curvature losses; low-loss polymer waveguide component design; low-loss polymer waveguide component fabrication; material properties; on-chip optical interconnection; on-chip optical signal distribution; optical beam splitters; optical losses; polyimide ridge waveguides; polymer technology; propagation losses; radius of curvature; straight polyimide waveguides; Integrated optics; Optical design; Optical device fabrication; Optical interconnections; Optical losses; Optical polymers; Optical waveguide components; Optical waveguides; Photonic integrated circuits; Polyimides;
fLanguage :
English
Journal_Title :
Photonics Technology Letters, IEEE
Publisher :
ieee
ISSN :
1041-1135
Type :
jour
DOI :
10.1109/68.544706
Filename :
544706
Link To Document :
بازگشت