DocumentCode
1480285
Title
Construction and testing of superferric dipoles for the A1900 Fragment Separator
Author
Zeller, A.F. ; DeKamp, J.C. ; Wagner, J. ; Capelli, D.
Author_Institution
Nat. Superconducting Cyclotron Lab., Michigan State Univ., East Lansing, MI, USA
Volume
11
Issue
1
fYear
2001
fDate
3/1/2001 12:00:00 AM
Firstpage
1725
Lastpage
1728
Abstract
The A1900 Fragment Separator contains four superconducting dipoles. The dipoles produce a field of 2 T at an operating current of 185 A. The changes in effective length have been measured and compared with calculations that predict a longer field boundary than observed. The magnets ran to full field without training. Edge angles were measured and found to be small. All magnets have been installed in the beam line and retested. First beam through the Separator is expected by the end of 2000
Keywords
accelerator magnets; cyclotrons; magnetic fields; superconducting magnets; 185 A; 2 T; A1900 Fragment Separator; construction; edge angles; field boundary; operating current; superconducting accelerator magnets; superferric dipoles; testing; Cyclotrons; Insulation; Magnetic field measurement; Particle separators; Structural beams; Superconducting coils; Superconducting magnets; Testing; Wire; Wounds;
fLanguage
English
Journal_Title
Applied Superconductivity, IEEE Transactions on
Publisher
ieee
ISSN
1051-8223
Type
jour
DOI
10.1109/77.920116
Filename
920116
Link To Document