DocumentCode
1494281
Title
UWB bandpass filter with notched band using DSRR
Author
Li, Qifeng ; Li, Z.-J. ; Liang, Chang-Hong ; Wu, Bin
Author_Institution
Nat. Key Lab. of Antennas & Microwave Technol., Xidian Univ., Xi´an, China
Volume
46
Issue
10
fYear
2010
Firstpage
692
Lastpage
693
Abstract
A topology of a compact planar microstrip filter with a notched band is introduced, which employs a split-ring resonator defected ground structure (DSRR). Folded short-circuited stubs are used to realise the bandpass filter with good selectivity and out-of-band characteristics. By employing a split-ring resonator defected ground structure, a narrow notched band was introduced to reject the undesired wireless local-area network (WLAN) radio signals. The measured insertion loss is less than 1.6 dB, the return loss is more than 13 dB, and the variation of group delay is less than 0.5 ns throughout most of the two passbands. The width of the narrow notched band is about 1 GHz and the attenuation is more than 25 dB at the centre frequency of 5.4 GHz.
Keywords
band-pass filters; defected ground structures; microstrip filters; resonators; ultra wideband communication; UWB bandpass filter; compact planar microstrip filter; defected ground structure; folded short-circuited stub; group delay variation; insertion loss; notched band; return loss; split-ring resonator; wireless local-area network radio signal;
fLanguage
English
Journal_Title
Electronics Letters
Publisher
iet
ISSN
0013-5194
Type
jour
DOI
10.1049/el.2010.0827
Filename
5466347
Link To Document