Manufacturability issues related to transient thermal annealing of titanium silicide films in a rapid thermal processor

Transient thermal annealing of sputtered titanium films in a rapid thermal processor (RTP) is critically evaluated from the viewpoint of manufacturability-related considerations. In particular, the thin-film properties of the resulting titanium silicide on polysilicon and silicon, process uniformity, and unit step wafer yield of high-density scaled device structures are investigated. The experimental results suggest that RTP silicides show good thin-film properties for manufacturability on planar wafer surfaces. Transient thermal gradients in an RTP system are shown to cause substantial variations in the electrical and structural properties of TiSi_x films formed on silicon substrates with varying substrate thicknesses. Closed-loop temperature control in an RTP reactor provided stoichiometrically identical TiSi_x films with negligible substrate thickness dependence. The experimental results also suggest that careful wafer surface temperature control is needed when forming titanium silicide films on nonplanar silicon surfaces, silicon trenches, and process monitor wafers without predetermined wafer thicknesses