DocumentCode :
1519798
Title :
New Pixel Circuit Design Employing an Additional Pixel Line Insertion in AMOLED Displays Composed by Excimer Laser-Crystallized TFTs
Author :
Jin, Guanghai ; Choi, Sangmoo ; Kim, Moojin ; Kim, Sungchul ; Song, Jonghyun
Author_Institution :
Phys. Dept., Chungnam Nat. Univ., Daejeon, South Korea
Volume :
8
Issue :
8
fYear :
2012
Firstpage :
479
Lastpage :
482
Abstract :
Active matrix organic light-emitting diode (AMOLED) displays are fabricated from polycrystalline silicon, which is formed in the single and double (overlap) scanned area during the excimer laser annealing (ELA) process. A redundant pixel line (RPL) design is proposed to remove the overlapping mura and, as a result, a 5-in AMOLED display is successfully fabricated without any non-uniform line image on the overlapping scanned area. This result indicates that the fabrication of a large-sized AMOLED panel is possible using ELA crystallization through an RPL design.
Keywords :
LED displays; elemental semiconductors; excimer lasers; laser beam annealing; organic light emitting diodes; thin film transistors; AMOLED display; ELA; RPL; Si; TFT; active matrix organic light emitting diode; excimer laser annealing; excimer laser crystallization; fabrication; pixel circuit design; pixel line insertion; polycrystalline silicon; redundant pixel line; size 5 in; Active matrix organic light emitting diodes; Laser beams; Lasers; Performance evaluation; Silicon; Surface morphology; Thin film transistors; Polycrystalline silicon (poly-Si); active-matrix organic light-emitting diode (AMOLED); excimer laser crystallization; redundant pixel line; thin-film transistor (TFT);
fLanguage :
English
Journal_Title :
Display Technology, Journal of
Publisher :
ieee
ISSN :
1551-319X
Type :
jour
DOI :
10.1109/JDT.2012.2191533
Filename :
6202718
Link To Document :
بازگشت