Title :
Effects of bulk wave radiation on IDT admittance on 42/spl deg/YX-LiTaO/sub 3/
Author :
Hashimoto, Ken-Ya ; Yamaguchi, Masatsune ; Kovacs, Günter ; Wagner, Karl Christian ; Ruile, Werner ; Weigel, Robert
Author_Institution :
Dept. of Electron. & Mech. Eng., Chiba Univ., Japan
Abstract :
This paper investigates the effects of bulk acoustic wave (BAW) radiation on the admittance of interdigital transducers (IDTs) with significant internal reflections of shear horizontal (SH) type leaky surface acoustic waves (SAWs) on 42/spl deg/YX-LiTaO/sub 3/(42-LT). Theoretical analysis is made by using the discrete Green function theory, and synchronous one-port resonators are analyzed. It is shown that the BAW radiation significantly affects the IDT characteristics even for resonators; under certain circumstances, BAWs launched from an IDT are converted into SH-type SAWs by the strong internal reflections, and they interact with the BAWs radiated by the IDT. Then, the net amount of the radiated BAW power is highly dependent upon the number of IDT finger pairs. For the precise simulation of devices based on the SH-type SAWs with strong internal reflections, the BAW radiation should carefully be taken into consideration. If the BAW radiation is ignored, the radiated power of the SH-type SAWs may seem to be negative above the BAW cut-off frequency.
Keywords :
Green´s function methods; bulk acoustic wave devices; interdigital transducers; lithium compounds; surface acoustic wave resonators; surface acoustic wave transducers; 42/spl deg/YX-LiTaO/sub 3/; LiTaO/sub 3/; admittance; bulk acoustic wave radiation; discrete Green function; interdigital transducer; internal reflection; numerical simulation; shear horizontal leaky surface acoustic wave; synchronous one-port resonator; Acoustic reflection; Acoustic waves; Admittance; Cutoff frequency; Fingers; Gratings; Green function; Permittivity; Sawing machines; Surface acoustic waves;
Journal_Title :
Ultrasonics, Ferroelectrics, and Frequency Control, IEEE Transactions on