• DocumentCode
    1530025
  • Title

    A Quasi-Sliding Mode Approach for Robust Control and Speed Estimation of PM Synchronous Motors

  • Author

    Corradini, Maria Letizia ; Ippoliti, Gianluca ; Longhi, Sauro ; Orlando, Giuseppe

  • Author_Institution
    Scuola di Sci. e Tecnol., Univ. di Camerino, Camerino, Italy
  • Volume
    59
  • Issue
    2
  • fYear
    2012
  • Firstpage
    1096
  • Lastpage
    1104
  • Abstract
    This paper presents a discrete-time variable-structure-based control and a speed estimator designed for a permanent-magnet synchronous motor (PMSM). A cascade control scheme is proposed which provides accurate speed tracking performance. In this control scheme the speed estimator is a robust digital differentiator that provides the first derivative of the encoder position measurement. The analysis of the control stability is given and the ultimate boundedness of the speed tracking error is proved. The control scheme is experimentally tested on a commercial PMSM drive. Reported experimental evidence shows that the proposed solution produces good speed trajectory tracking performance and it is robust in the presence of disturbances affecting the system.
  • Keywords
    angular velocity control; cascade control; discrete time systems; permanent magnet motors; robust control; synchronous motor drives; variable structure systems; PMSM drive; cascade control scheme; discrete time system; permanent magnet synchronous motor; quasi-sliding mode approach; robust control; robust digital differentiator; speed estimation; speed tracking; stability; variable structure system; Bismuth; Digital TV; Digital signal processing; Permanent magnet motors; Robustness; Synchronous motors; Torque; Discrete-time sliding mode control; electrical motor control; robust control; speed estimation;
  • fLanguage
    English
  • Journal_Title
    Industrial Electronics, IEEE Transactions on
  • Publisher
    ieee
  • ISSN
    0278-0046
  • Type

    jour

  • DOI
    10.1109/TIE.2011.2158035
  • Filename
    5779730