DocumentCode :
1533126
Title :
Two-dimensional drive characteristics by circular-shaped motor
Author :
Fujii, Nobuo ; Fujitake, Masashi
Author_Institution :
Dept. of Electr. & Electron. Eng., Kyushu Univ., Fukuoka, Japan
Volume :
35
Issue :
4
fYear :
1999
Firstpage :
803
Lastpage :
809
Abstract :
An induction-type motor with a toroidal core, called a surface induction motor (SIM), is proposed for any directional motion in a two-dimensional plane. In the case of small size, the SIM has large thrust compared with a linear induction motor (LIM) because the slots in the SIM can be used effectively. For practical use, a conventional double-layer winding and ordinary three-phase inverters are used. However, the winding is divided into four or eight sections in the direction of the circumference of the core. The eight-division-type SIM supplied by four inverters can change the direction of linear motion continuously with constant thrust by increasing the main winding current by only about 11%
Keywords :
DC-AC power convertors; induction motors; invertors; machine testing; machine theory; machine windings; 2-D drive characteristics; circular-shaped motor; core circumference; double-layer winding; linear motion; main winding current; surface induction motor; three-phase inverters; toroidal core motor; Coils; Electromagnetic analysis; Induction motors; Industry Applications Society; Inverters; Magnetic cores; Permanent magnet motors; Planar motors; Systems engineering and theory; Toroidal magnetic fields;
fLanguage :
English
Journal_Title :
Industry Applications, IEEE Transactions on
Publisher :
ieee
ISSN :
0093-9994
Type :
jour
DOI :
10.1109/28.777187
Filename :
777187
Link To Document :
بازگشت