DocumentCode :
1541130
Title :
The protection system of the superconducting coils in the Barrel Toroid of ATLAS
Author :
Acerbi, E. ; Sorbi, M. ; Volpini, G. ; Dael, A. ; Lesmond, C.
Author_Institution :
INFN, Milan Univ., Italy
Volume :
9
Issue :
2
fYear :
1999
fDate :
6/1/1999 12:00:00 AM
Firstpage :
1101
Lastpage :
1104
Abstract :
An analysis of the discharge of the Barrel Toroid under several operating conditions has been carried out. The main critical parameters of the discharge (i.e. the maximum temperature inside the coils, the maximum temperature gradient, the maximum voltage at the coil ends and the maximum decentering forces acting on the BT and ECT magnets) have been calculated for several operating conditions (heaters on, heaters off, short circuit with heaters on or off). The aim of this analysis is to provide a cross check of the protection design of the Barrel Toroid coils with an independent study. The results validate the choice to use a low value of dump resistance, and give some important warning in the case of heater failure or presence of a short circuit.
Keywords :
accelerator magnets; heating; protection; short-circuit currents; storage rings; superconducting coils; synchrotrons; ATLAS; BT magnet; Barrel Toroid; ECT magnet; Large Hadron Collider; coil ends; critical discharge parameters; heater failure; heaters off; heaters on; low dump resistance; maximum decentering forces; maximum temperature; maximum temperature gradient; maximum voltage; operating conditions; protection system; short circuit; superconducting coils; Coupling circuits; Electrical capacitance tomography; Electromagnetic coupling; Magnetic analysis; Magnetic circuits; Protection; Superconducting coils; Superconducting magnets; Temperature; Voltage;
fLanguage :
English
Journal_Title :
Applied Superconductivity, IEEE Transactions on
Publisher :
ieee
ISSN :
1051-8223
Type :
jour
DOI :
10.1109/77.783490
Filename :
783490
Link To Document :
بازگشت