Title :
Optoelectronic clocking system for testing RSFQ circuits up to 20 GHz
Author :
Buzacchelli, J.F. ; Hae-Seung Lee ; Alexandrou, S. ; Misewich, J.A. ; Ketchen, M.B.
Author_Institution :
Dept. of Electr. Eng. & Comput. Sci., MIT, Cambridge, MA, USA
fDate :
6/1/1997 12:00:00 AM
Abstract :
Unlike coaxial cable, optical fiber has a bandwidth commensurate with the clock rates of even the fastest rapid single flux quantum (RSFQ) circuits. Employing this advantage, we have developed an optoelectronic clocking system, in which optical pulses from a picosecond laser are delivered via fiber to a superconducting chip, on which metal-semiconductor-metal (MSM) photodiodes generate fast electrical pulses with subpicosecond timing accuracy. An optical pulse splitter, constructed out of beamsplitters, mirrors, and half-wave plates, permits selection of pulse pattern and clock rate from 80.6 MHz up to 20.6 GHz. With a sampling oscilloscope, we have directly observed optical triggering of an RSFQ T flip-flop at frequencies up to 1.3 GHz with a variety of bit patterns. Optical triggering of a Josephson transmission line (JTL) at frequencies up to 20.6 GHz has been verified by precise measurement of the Josephson voltage; this result represents the highest clock rate ever reported for an optical interface for RSFQ circuits.
Keywords :
clocks; flip-flops; integrated circuit testing; optical fibres; superconducting device testing; superconducting integrated circuits; 20 GHz; Josephson transmission line; MSM photodiode; RSFQ circuit testing; T flip-flop; electrical pulse; optical fiber; optical interface; optical pulse splitter; optical triggering; optoelectronic clocking system; picosecond laser; rapid single flux quantum circuit; sampling oscilloscope; superconducting chip; voltage measurement; Bandwidth; Circuit testing; Clocks; Coaxial cables; Frequency; Optical fibers; Optical pulse generation; Optical pulses; Superconducting transmission lines; System testing;
Journal_Title :
Applied Superconductivity, IEEE Transactions on