Electrical test methods for nonceramic insulators used for live line replacement

Author

Karady, G.G.

Volume

12

Issue

2

fYear

1997

fDate

4/1/1997 12:00:00 AM

Firstpage

965

Lastpage

970

Abstract

The utilities frequently use nonceramic insulators for live line maintenance. These insulators are not always tested electrically during manufacture. Undetected internal failures in an insulator may endanger workers performing live line maintenance on the insulators. The live line maintenance requires careful testing of each insulator before use. For the selection of the most effective test method, insulators were purposely made with internal flaws and then subjected to megger, hot stick, partial discharge and RIV tests as well as measurement of the total and surface component of leakage current, together with surface heating measurement. The most sensitive method is the RIV test, which identified 6 insulators with flaws. The partial discharge and hot stick tests found 4 insulators with embedded wire. From a practical point of view, the modified hot stick test seems to be suitable for field test of the insulators

Keywords

charge measurement; insulator testing; leakage currents; maintenance engineering; partial discharges; temperature measurement; RIV test; electrical test methods; embedded wire; flaw detection; hot stick test; internal flaws; leakage current surface component; live line maintenance; live line replacement; megger test; nonceramic insulators; partial discharge test; surface heating measurement; undetected internal failures; Cable insulation; Current measurement; Dielectrics and electrical insulation; Heating; Insulator testing; Leakage current; Manufacturing; Partial discharge measurement; Partial discharges; Surface discharges;

fLanguage

English

Journal_Title

Power Delivery, IEEE Transactions on

Publisher

ieee

ISSN

0885-8977

Type

jour

DOI

10.1109/61.584421

Filename

584421