Rotary traveling-wave oscillator arrays: a new clock technology

Rotary traveling-wave oscillators (RTWOs) represent a new transmission-line approach to gigahertz-rate clock generation. Using the inherently stable LC characteristics of on-chip VLSI interconnect, the clock distribution network becomes a low-impedance distributed oscillator. The RTWO operates by creating a rotating traveling wave within a closed-loop differential transmission line. Distributed CMOS inverters serve as both transmission-line amplifiers and latches to power the oscillation and ensure rotational lock. Load capacitance is absorbed into the transmission-line constants whereby energy is recirculated giving an adiabatic quality. Unusually for an LC oscillator, multiphase (360°) square waves are produced directly. RTWO structures are compact and can be wired together to form rotary oscillator arrays (ROAs) to distribute a phase-locked clock over a large chip. The principle is scalable to very high clock frequencies. Issues related to interconnect and field coupling dominate the design process for RTWOs. Taking precautions to avoid unwanted signal couplings, the rise and fall times of 20 ps, suggested by simulation, may be realized at low power consumption. Experimental results of the 0.25-μm CMOS test chip with 950-MHz and 3.4-GHz rings are presented, indicating 5,5-ps jitter and 34-dB power supply rejection ratio (PSRR). Design errors in the test chip precluded meaningful rise and fall time measurements