• DocumentCode
    1547064
  • Title

    0.3-μm gate-length enhancement mode InAlAs/InGaAs/InP high-electron mobility transistor

  • Author

    Mahajan, A. ; Arafa, M. ; Fay, P. ; Caneau, C. ; Adesida, I.

  • Author_Institution
    Center for Compound Semicond. Microelectron., Illinois Univ., Urbana, IL, USA
  • Volume
    18
  • Issue
    6
  • fYear
    1997
  • fDate
    6/1/1997 12:00:00 AM
  • Firstpage
    284
  • Lastpage
    286
  • Abstract
    The fabrication and performance of ultra-high-speed 0.3-μm gate-length enhancement-mode high-electron-mobility transistors (E-HEMT´s) are reported. By using a buried platinum-gate technology and incorporating an etch-stop layer in the heterostructure design, submicron E-HEMT devices exhibiting both high-threshold voltages and excellent threshold voltage uniformity have been achieved. The devices demonstrate a threshold voltage of +171 mV with a standard deviation of only 9 mV. In addition, a maximum DC extrinsic transconductance of 697 mS/mm is measured at room temperature. The output conductance is 22 mS/mm, which results in a maximum voltage gain (g/sub m//g0) of 32. The devices show excellent RF performance, with a unity current-gain cutoff frequency (fT) of 116 GHz and a maximum frequency of oscillation (fmax) of 229 GHz. To the best of the authors´ knowledge, these are the highest reported frequencies for lattice-matched E-HEMT´s on InP.
  • Keywords
    III-V semiconductors; aluminium compounds; gallium arsenide; high electron mobility transistors; indium compounds; microwave field effect transistors; millimetre wave field effect transistors; semiconductor technology; 0.3 mum; 0.3-/spl mu/m gate-length; 116 GHz; 171 mV; 22 mS/mm; 229 GHz; 697 mS/mm; InAlAs-InGaAs-InP; InP; RF performance; buried Pt-gate technology; enhancement mode InAlAs/InGaAs/InP high-electron mobility transistor; etch-stop layer; fabrication; heterostructure design; high-threshold voltages; lattice-matched E-HEMT; maximum DC extrinsic transconductance; maximum frequency of oscillation; maximum voltage gain; output conductance; performance; threshold voltage uniformity; ultra-high-speed HEMT; unity current-gain cutoff frequency; Cutoff frequency; Etching; Fabrication; HEMTs; Indium compounds; Indium gallium arsenide; Indium phosphide; MODFETs; Temperature measurement; Threshold voltage;
  • fLanguage
    English
  • Journal_Title
    Electron Device Letters, IEEE
  • Publisher
    ieee
  • ISSN
    0741-3106
  • Type

    jour

  • DOI
    10.1109/55.585360
  • Filename
    585360