Fabrication of biaxially textured Ni substrates and LaNiO/sub 3/ buffer layers for Tl-1223 thick films

Author

Gladstone, T.A. ; Moore, J.C. ; Wilkinson, A.J. ; Grovenor, C.R.M.

Author_Institution

Dept. of Mater., Oxford Univ., UK

Volume

9

Issue

2

fYear

1999

fDate

6/1/1999 12:00:00 AM

Firstpage

2252

Lastpage

2255

Abstract

We have fabricated cube texture nickel substrates and examined the relationship between percentage rolling deformation and annealing conditions on the degree of texture obtained using XRD and EBSD techniques. We have found that unaligned grains may be avoided by rolling to 95% reduction and annealing at 800/spl deg/C for 4 hours. We have fabricated LaNiO/sub 3/ films on YSZ and lanthanum aluminate by spray pyrolysis and achieved cube texture in thin coatings.

Keywords

X-ray diffraction; annealing; barium compounds; calcium compounds; deformation; high-temperature superconductors; lanthanum compounds; nickel; rolling; spray coating techniques; substrates; texture; thallium compounds; EBSD; LaNiO/sub 3/; LaNiO/sub 3/ buffer layers; Ni; Tl-1223 thick films; TlBaCaCuO; XRD; YSZ; annealing conditions; biaxially textured Ni substrates; cube texture nickel substrates; fabrication; lanthanum aluminate; percentage rolling deformation; spray pyrolysis; thin coatings; unaligned grains; Annealing; Buffer layers; Fabrication; Nickel; Scanning electron microscopy; Spraying; Substrates; Superconducting epitaxial layers; Superconducting films; Superconducting materials;

fLanguage

English

Journal_Title

Applied Superconductivity, IEEE Transactions on

Publisher

ieee

ISSN

1051-8223

Type

jour

DOI

10.1109/77.784918

Filename

784918