Fabrication of ultrathin p++ silicon microstructures using ion implantation and boron etch-stop

This paper discusses the fabrication of submicron p⁺⁺ silicon microstructures for a number of MEMS applications using boron ion implantation, rapid thermal annealing, and boron etch-stop. To form these thin structures, the silicon is implanted with boron at an energy of 40 keV and doses of 5×10¹⁵ cm^-2 and 7×10¹⁵ cm^-2, which produce a peak concentration of more than 10²⁰ cm^-3, sufficient for achieving an effective etch-stop in ethylene diamine pyrocathecol. The thickness of the p⁺⁺ layer varies from 0.2 to 0.3 μm depending on the annealing time and temperature. SUPREM simulation has been used to determine optimum implantation and annealing conditions. A number of microstructures, including thin silicon diaphragms as large as 2 mm on a side and 0.2 μm thick, hot wire anemometers with a temperature coefficient of resistance of ~1600 ppm/°C, and piezoresistive sound detectors, have been fabricated with high reproducibility, uniformity, and yield