Flux-Weakening Control of Nonsalient Pole PMSM Having Large Winding Inductance, Accounting for Resistive Voltage Drop and Inverter Nonlinearities

This paper proposes an improved flux-weakening control method to improve the drive performance of nonsalient pole permanent magnet synchronous motors having large winding inductance and consequently an infinite constant power speed ratio. The proposed method consists of two parts. The first part utilizes the voltage differences between the input and output of a minimum-magnitude-error over-modulation block to modify the d-axis current references. The second part uses the compensated q-axis voltage, in which the resistive voltage drop and the distorted voltage due to inverter nonlinearities are taken into account, to detect the maximum torque per voltage (MTPV) line. Under the MTPV condition, a PI controller with a low-pass filter is presented to modify the q-axis current reference. With these two parts, the bus voltage utilization in the proposed method is close to the six-step operation and the actual current trajectory approaches the ideal MTPV line. As a result, the drive performance in the whole flux-weakening region is optimized in terms of maximizing the output torque/power. The method also shows a good performance in transient response. Effectiveness and superiorities of the proposed method are verified by experimental results.