Simulation of short LSAW transducers including electrode mass loading and finite finger resistance

The theory for the 2-D numerical analysis of acoustic wave generation from finite length leaky surface acoustic wave (LSAW) transducer structures is presented. The mass loading of the electrodes is incorporated through the use of the finite element method (FEM). The substrate is modeled using both analytical and numerical means. The advantages of this simulation are twofold. First, it is capable of extracting the individual bulk wave conductances from the overall conductance of a given device. At large distances from the transducer, the angular distribution of power radiated relative to the substrate surface can then be calculated for each of the three possible bulk wave polarizations. The second advantage of the simulation is that the effect of finite electrode resistance is included through the use of a series equivalent resistance for each electrode in the structure. Once the resistance for each electrode in the structure has been determined, the overall effect on the device admittance is modeled by applying a constrained minimization process to the electrical boundary conditions of the transducer. To conclude the paper, the simulation will be compared against the experimental admittance of a 37-finger uniform transducer with a metallization ratio of 0.5 on 42/spl deg/ LiTaO/sub 3/. The agreement between theory and experiment is excellent.