Title :
Some design aspects of tapered and straight stator pole 6:4 switched reluctance machine
Author :
Sitsha, L.M.M. ; Kamper, M.J.
Author_Institution :
Dept. of Electr. & Electron. Eng., Stellenbosch Univ., South Africa
fDate :
6/21/1905 12:00:00 AM
Abstract :
This paper describes the design optimisation of a 6:4 medium power (50 kW) switched reluctance motor (SRM) with tapered and straight stator poles. The finite element analysis method (FEM) is directly used in the optimisation algorithm to optimise the machine in multidimensions. The optimisation is focused on the maximisation of the average phase-torque/copper losses of the machine. The static torque characteristics of both the tapered and the straight pole SRMs have been compared. It is found that tapering the stator poles improves the peak torque and average torque of the SRM significantly while the torque ripple is found to be very much the same for both machines
Keywords :
finite element analysis; losses; machine theory; optimisation; reluctance machines; stators; torque; 6:4 switched reluctance machine; SRM; average phase-torque; average torque; copper losses; finite element analysis method; multidimensional machine optimisation; optimisation algorithm; peak torque; static torque characteristics; stator pole design optimisation; straight stator poles; tapered stator poles; torque ripple; Algorithm design and analysis; Copper; Design optimization; Finite element methods; Multidimensional systems; Optimization methods; Reluctance machines; Reluctance motors; Stators; Torque;
Conference_Titel :
Africon, 1999 IEEE
Conference_Location :
Cape Town
Print_ISBN :
0-7803-5546-6
DOI :
10.1109/AFRCON.1999.821848
