A practical set-up for a standard test procedure on polyphase induction motors

Author

Van, P. Roy ; Renier, B. ; Hameyer, K. ; Belmans, R.

Author_Institution

Dept. of Electr. Eng., Katholieke Univ., Leuven, Belgium

Volume

1

fYear

1997

Firstpage

207

Abstract

The paper describes a practical set-up for testing low voltage, polyphase induction motors. The measured efficiency of an induction motor depends on the method and the standard according to which the measurements are performed. A short description of different standards as IEEE 112 and IEC 32 is given and the main discrepancies are mentioned. The measurement equipment for electrical and mechanical quantities and the employed data acquisition system are discussed. Reference is made to industrial measurements. Experimental results are discussed in detail

Keywords

IEEE standards; automatic test equipment; data acquisition; electric variables measurement; induction motors; loss measurement; machine testing; measurement standards; mechanical variables measurement; IEC 32 standard; IEEE 112 standard; data acquisition; efficiency; electrical quantities measurement; industrial measurements; mechanical quantities measurement; standard test; testing; Data acquisition; Electric variables measurement; Electrical equipment industry; IEC standards; Induction motors; Low voltage; Measurement standards; Mechanical variables measurement; Performance evaluation; Testing;

fLanguage

English

Publisher

ieee

Conference_Titel

Instrumentation and Measurement Technology Conference, 1997. IMTC/97. Proceedings. Sensing, Processing, Networking., IEEE

Conference_Location

Ottawa, Ont.

ISSN

1091-5281

Print_ISBN

0-7803-3747-6

Type

conf

DOI

10.1109/IMTC.1997.603944

Filename

603944