Determination of Fracturing Mechanisms in Ice using Pulsed Power

Summary form only given. The destruction of solid materials by electrical means has only recently come under the scrutiny of research. Ice serves as an especially attractive test medium due to its accessibility, its service as a model solid, and its applicability in real-world problems such as ice-breaking ships or even the extraction of water from possible ice sheets on non-Earth environments. The experiments described herein utilize exploding wires and surrogate exploding wires in direct contact with conventional ice cubes in order to determine the influence of fusing waveshape and method of contact on the fracturing of ice. The surrogate exploding wire used consist of a layer of polypropylene with ~100 Aring aluminum coating, and are referred to as metallized polypropylene film (MPPF). While the MPPF acts like a fuse just as a thin wire does, its properties can be manipulated to produce a controlled characteristic voltage-current wave shape for the desired application. This allows the determination of what waveform aspects, if any, result in the fracturing of ice. Then, the placement of the wire or MPPF with respect to the ice was varied to determine the best configuration.