DocumentCode :
1633263
Title :
Experimental study of heating in induction motor fed by PWM inverter
Author :
Benhaddadi, M. ; Khaldi, R. ; Benghanem, M.
Author_Institution :
Inst. d´´Electron., Bab-Ezzouar Univ., Alger, Algeria
Volume :
1
fYear :
1997
Firstpage :
335
Abstract :
In the present paper, the influence of the supply from PWM inverter in the heating distribution in induction motor is presented. The squirrel cage induction motor rated at 2.2 kW; 380 V; 50 Hz; 1420 rpm, has been thermally tested while being supplied alternatively from PWM inverter and sinusoidal voltage source. Many thermistors were placed in the rotor and stator of the motor. Temperature measurements were taken with a complete acquisition system which is used for precise testing and investigating thermal process. Heating curves were obtained in the thermistor points. The results obtained using sinusoidal and nonsinusoidal voltage supply were compared under several load conditions
Keywords :
PWM invertors; data acquisition; machine testing; squirrel cage motors; temperature measurement; thermistors; 2.2 kW; 380 V; 50 Hz; PWM inverter; acquisition system; heating; heating curves; heating distribution; nonsinusoidal voltage supply; rotor; sinusoidal voltage source; sinusoidal voltage supply; squirrel cage induction motor; stator; temperature measurements; thermal process; thermal testing; thermistor points; thermistors; Heating; Induction motors; Pulse width modulation; Pulse width modulation inverters; Rotors; Stators; System testing; Temperature measurement; Thermistors; Voltage;
fLanguage :
English
Publisher :
ieee
Conference_Titel :
Instrumentation and Measurement Technology Conference, 1997. IMTC/97. Proceedings. Sensing, Processing, Networking., IEEE
Conference_Location :
Ottawa, Ont.
ISSN :
1091-5281
Print_ISBN :
0-7803-3747-6
Type :
conf
DOI :
10.1109/IMTC.1997.603967
Filename :
603967
Link To Document :
بازگشت