The design of 5 GHz voltage controlled ring oscillator using source capacitively coupled current amplifier

Author

Rui Tao ; Berroth, M.

Author_Institution

Inst. of Electr. & Opt. Commun. Eng., Stuttgart Univ., Germany

Volume

1

fYear

2003

Abstract

A 5 GHz voltage controlled ring-oscillator (VCO) has been designed using 0.18 /spl mu/m CMOS technology. Source Capacitively Coupled Current Amplifier (SC3A) is adopted to realize this VCO. Because of the band-pass characteristic of the SC3A, this VCO exhibits the low noise performance with a large tuning range. It can operate from 4.3 GHz up to 6.1 GHz with a phase noise of about -85 dBc/Hz at 1 MHz frequency offset. For the 2 V supply voltage, the power consumption is about 80 mW.

Keywords

CMOS analogue integrated circuits; MMIC amplifiers; circuit tuning; coupled circuits; field effect MMIC; integrated circuit noise; low-power electronics; phase noise; voltage-controlled oscillators; 0.18 micron; 2 V; 4.3 to 6.1 GHz; 5 GHz; 80 mW; CMOS technology; SC3A; band-pass characteristic; low noise performance; phase noise; power consumption; source capacitively coupled current amplifier; tuning range; voltage controlled ring oscillator; CMOS technology; Coupling circuits; Differential amplifiers; Optical amplifiers; Optical fiber communication; Phase noise; Resonance; Ring oscillators; Voltage control; Voltage-controlled oscillators;

fLanguage

English

Publisher

ieee

Conference_Titel

Microwave Symposium Digest, 2003 IEEE MTT-S International

Conference_Location

Philadelphia, PA, USA

ISSN

0149-645X

Print_ISBN

0-7803-7695-1

Type

conf

DOI

10.1109/MWSYM.2003.1211046

Filename

1211046