DocumentCode
1648503
Title
Study on the utilization of fly ash as raw material for architectonic tile
Author
Budsuren, Janchiviin ; Yamana, Kazuo
Author_Institution
Sch. of Mater. Sci., Mongolian Univ. of Sci. & Technol., Ulaanbaatar, Mongolia
fYear
2010
Firstpage
423
Lastpage
426
Abstract
In order to utilize fly ashes of Mongolian fourth and Tsuruga Power Plant´s as ceramics raw material, the green body of tile was prepared by using the methods Dr. blade. The sintering of tile performed at temperature 1000-1400°C and mullite formation process was conducted above 1250°C. Water absorption, shrinkage and bending strength of tile were corresponded to Japan industrial standard (JIS). Most of phase composition of tile is mullite and crystobalite.
Keywords
absorption; architecture; bending strength; ceramics; fly ash; raw materials; shrinkage; sintering; tiles; Japan industrial standard; Mongolia; Tsuruga power plant; architectonic tile; bending strength; ceramics raw material; crystobalite; fly ash; green body; mullite formation process; shrinkage; sintering; temperature 1000 degC to 1400 degC; water absorption; Ash; Chemicals; Dr. blade method; X-ray diffraction analysis; architectonic tile; ceramics; fly ash;
fLanguage
English
Publisher
ieee
Conference_Titel
Strategic Technology (IFOST), 2010 International Forum on
Conference_Location
Ulsan
Print_ISBN
978-1-4244-9038-7
Electronic_ISBN
978-1-4244-9036-3
Type
conf
DOI
10.1109/IFOST.2010.5668078
Filename
5668078
Link To Document